Saturday, February 21, 2015

How I Frame Paintings on Panel


Today I'm doing something here I have never done.  A how-to if you will.  I write my blog mostly to myself.  Well that's not true, to myself and in hopes that there are other painters or people out there that might get excited about the same things as me.  

But recently Alex said to me 'Are you a Blogger?' And I was like 'no way.'  And it made me upset and I wasn't sure why at first.  But I realized its because it signifies something I don't think of this as (even though it is a blog and I am the -er).  And that's not to say a blogger is a bad thing but I definitely don't consider myself one or want to be one.  

I think of a blogger as someone who is doing what they do as their profession or hoping to make it their profession and someone who wants more readers.  More readers = more money, power, whatever. I am a painter first and then probably an adjunct second and definitely not a blogger third.  I just like to write about and look at art and I am happy to be in a dusty corner of the internet, hanging out, because that means I can say what I actually want to say about painting and what is the point if not that?  If my mom and those who googled 'Susan Rothenberg Drawings' were the only people to stumble here that would be ok by me.  But in reality I guess there are quite a few more than that.

So all this is to say I have gotten emails from people who do read this blog and have asked me about different things.  I usually just write back and we talk about painting and its nice.  But recently I have gotten like 4 emails just about how I frame my paintings.  And so while I think this will be a one time or rare thing, I decided to answer in a visual presentation, the how-to.  So that is how this came about and also hello to whoever you are, thanks for stopping by.

How To Float Frame a Painting on Panel or Masonite


1. You have to cradle the back of the picture.  This means running strips of wood around the edge to give it depth.  (See Photo 6)  A cradle also keeps panel pieces from warping.  I like to use select pine 1x2x4...about $2.50 a piece at Lowes.


 2. Make a 45 degree cut into one side.

  
3. Line it up with the back of your painting (this one is on masonite) and make a mark where the other side needs to be cut.  This doesn't have to be too exact because it can be a little smaller than the back, just not bigger.  Don't want it to hang over in the front.


4. Do the same for the next piece.  



5. You want the strips directly across from each other to be exactly the same size so line it up like this to make your pencil mark.  If the painting is a square you will line up all four pieces.


6. There are all four cradle pieces, now they need to be glued on. 


7.  Using wood glue and clamps, get a secure fit in the corners and let dry for at least an hour.




8. Now for the frame you have to do those same steps.  I start with moulding that a friend builds me (bottom of picture) but you can join two long strips yourself as well.  I use poplar (little less expensive) if I am making a painted frame and maple if not.  The finished frame above is maple.


9.  Here's where I have a little bit of a photo lapse but you can see the four separate pieces of cut moulding.  Depending how big you want your float, measure the cuts a little further out.  I like somewhere around a quarter inch float, bigger or smaller depending on the size of the painting.  Once you cut all the frame moulding, check your cradled painting inside before gluing the pieces together.


10.  When you are ready to glue the corners of the frames I suggest corner clamps.  My studio mate lets me borrow hers and they make a world of difference.  Glue the two L's in as tight a fit you can get.  Let dry for an hour plus.  This is a problem for me I always rush it.  


11.  Glue the two L's together and let that sit for a few hours to get really solid.  (envision four clamps around the corners of the frame above)


12. Once the frame is dry, time to sand.  Least favorite part.  If you are painting the frames you don't have to be as perfect with it but still you need to sand well.  Either with a sander (thank you again studio mate) or by hand go around the whole thing with medium, fine and extra fine grit sandpaper.  Make sure the corners stay sharp but get addressed well.



13.  If you are painting, make sure to dust the frame off really well.  Then I use a sponge brush and basic white eggshell paint, about 3 coats.


14.  If you are not painting you may like to oil or wax the frame wood to protect it.  Then pop your painting in and using foam pieces or paper get the float secure so when you turn it over it doesn't shift.  Turn it over and hammer in 4 little nails from the back of the frame to the cradle on all sides.  Put in the hooks and wire you desire, remove foam/paper pieces and its all done.





15.  Put it on the wall.  I also sign the back of the frame.  (this is a painted version, I used a slightly tinted paint)

Hope that may be helpful.  I actually don't consider myself a talented framer so its kind of weird to be doing this post but I have experimented with a lot of frame options when it comes to working on panel and this is by far the best I have found.

7 comments:

Unknown said...

I read and enjoyed this painting blog.

Aubrey Levinthal said...

Thanks Peter!

Unknown said...

I enjoyed your framing lesson. Really useful.
Thank you Aubrey
Estelle Lucas

Aubrey Levinthal said...

I'm so glad. Thanks Estelle.

Unknown said...

Thank you for taking the time to post this! Very nice art!

h buchholz said...

THIS IS AWESOME! Thanks for sharing!

Luisa Woods said...

thank you for sharing. I have tons of unframed paintings on masonite board. these look beautiful

Post a Comment